OZI

Ụdị ihe: Ihe nkiri dị mkpa nke Platinum Resistance Thermistor
Akụkụ akụkụ:2.0mm x 2.3mm x 1.0mm,1.6mm x 2.0mm x 1.0mm,1.2mm x 2.0mm x 1.0mm
Nkọwapụta ndu: Ogologo: 10 mm, dayameta: 0.2 mm
Ihe na-edu ndú: Platinum-nickel waya (nhọrọ: silver-palladium/platinum/ silver-nickel)
Ike nkwụsị nke ndu:≥9 N
Nguzogide mkpuchi: 100 MΩ na 20°C,>2 MΩ na 500°C
Ọnụego okpomọkụ (TCR):3850 ppm/°C
Na-arụ ọrụ ugbu a: 0.3 ~ 1 mA (mmetụta ọkụ onwe onye ga-atụle)
Nkwụsi ike ogologo oge: ≤± 0.04% nkwụsị nguzogide mgbe awa 1000 gachara na 500°C
Oge nzaghachi: [Flow (V = 0.4 m / s)] t0.5 = 0.05 s, t10 = 0.15 s [Ikuku ikuku (V = 2 m / s)] t0.5 = 3 s, t10 = 10 s
Ọnụọgụ ọkụ nke onwe:0.4°C/mW
Nguzogide ịma jijiji:≥40g osooso (ogo 10 ~ 2000 Hz)
Nguzogide ujo:≥100g osooso (8 ms ọkara-sine ife)
Nkwakọ ngwaahịa: Ngwunye plastik Vacuum (ụdị nkwakọ ngwaahịa ndị ọzọ dị mgbe a rịọrọ ya)

Ụdị ihe: SMD Mkpa ihe nkiri Platinum Resistance Thermistor
Akụkụ akụkụ:3.2mm x 1.6mm x 0.7mm
Ọnụego okpomọkụ (TCR):3850 ppm/°C
Oke Nleta Okpomọkụ:-50°C ruo +200°C
Nkwụsi ike ogologo oge: ≤± 0.06% nkwụsị nke R₀°C mgbe awa 1000 gachara na 200°C
Ụdị njedebe: Tin alloy ọnụ
Usoro ire ere: Nrụgharị ihe nrịbama ma ọ bụ ire ere. A na-atụ aro tapawa ihe na-ekpo ọkụ na-ekpo ọkụ.
Okpomọkụ ire ere: 230-240°C

Ụdị ihe: Platinum Resistance Thermistor
Akụkụ akụkụ:2.0mm x 2.3mm x 1.0mm,2.0mm x 4.0mm x 1.0mm
Nkọwapụta ndu; Ogologo: 10 mm, dayameta: 0.2 mm
Ihe na-edu ndú: Platinum-nickel waya (nhọrọ: silver-palladium/platinum/ọlaọcha dị ọcha)
Ike nkwụsị nke ndu:≥9 N
Nguzogide mkpuchi: 100 MΩ na 20°C,>2 MΩ na 500°C
Ọnụego okpomọkụ (TCR):3850 ppm/°C
Na-arụ ọrụ ugbu a: 0.1-0.3 mA (mmetụta ọkụ onwe onye ga-atụle)
Nkwụsi ike ogologo oge: ≤± 0.04% nkwụsị nke R₀ (0 ° C ntụaka) mgbe awa 1000 gachara na 500 ° C
Oge nzaghachi: Mmiri mmiri (V=0.4 m/s): t₀.₅ = 0.05 s, t₀.₉ = 0.15 s; Ikuku ikuku (V=2 m/s): t₀.₅ = 3 s, t₀.₉ = 10 s
Ngwakọta ikpo ọkụ nke onwe:0.4°C/mW (na 0°C)
Nguzogide ịma jijiji:≥40g osooso (ugboro ugboro: 10–2000 Hz)
Nguzogide ujo:≥100g osooso (8 ms ọkara-sine ife)
Nkwakọ ngwaahịa: Ngwunye plastik Vacuum (ụdị nkwakọ ngwaahịa ndị ọzọ dị mgbe a rịọrọ ya)